Angebote zu "Suspension" (55 Treffer)

Kategorien

Shops

DVO Suspension Diamond D1 Boost Fork 27.5" 44mm...
763,19 € *
ggf. zzgl. Versand

DVO Suspension Diamond D1 Boost Fork 27.5" 44mm OffsetMade with quality, hard-wearing materials and top-level suspension technology, this enduro-centric fork by DVO is boldly built for exhilarating downhill adventures. Constructed from aluminium, with magnesium-cast lowers, it provides every ride with 180mm of terrain-taming travel, as well as an array of adjustments to keep you upright and unrivalled from top to bottom. Boost-Sized, Aluminium-Built MTB ForkUsing a combination of six low-speed compression adjustments and 24 high-speed clicks, fine-tuning every ride to your preferred smoothness is made easy, as an OTT (Off The Top) adjustment system on the negative air spring improves control and sensitivity over smaller bumps. Equipped with a closed cartridge bladder damper and a Boost-sized thru axle, the Diamond D1 gives you enhanced rigidity and responsiveness over the most challenging runs, making it the ultimate trail-blazing fork for the downhill dynamo. Features: Steerer Material: Aluminium Crown Material: Forged Aluminium Stanchion Material: Aluminium, 35mm Lower Material: Magnesium casting Suspension: Air, OTT adjustment (negative spring preload) Damping:  Closed cartridge bladder system Steerer Diameter:  1 1/8-1.5", tapered Adjustments: High-speed and low-speed compression, rebound, OTT, air pressure Axle to Crown: 565mm Travel: 180mm Axle: 15x110mm Boost thru axle (bolted) Offset: 44mm Buy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.

Anbieter: Chain Reaction Cy...
Stand: 22.01.2020
Zum Angebot
DVO Suspension Diamond D1 Boost Fork 27.5" 44mm...
763,19 € *
ggf. zzgl. Versand

DVO Suspension Diamond D1 Boost Fork 27.5" 44mm OffsetMade with quality, hard-wearing materials and top-level suspension technology, this enduro-centric fork by DVO is boldly built for exhilarating downhill adventures. Constructed from aluminium, with magnesium-cast lowers, it provides every ride with 180mm of terrain-taming travel, as well as an array of adjustments to keep you upright and unrivalled from top to bottom. Boost-Sized, Aluminium-Built MTB ForkUsing a combination of six low-speed compression adjustments and 24 high-speed clicks, fine-tuning every ride to your preferred smoothness is made easy, as an OTT (Off The Top) adjustment system on the negative air spring improves control and sensitivity over smaller bumps. Equipped with a closed cartridge bladder damper and a Boost-sized thru axle, the Diamond D1 gives you enhanced rigidity and responsiveness over the most challenging runs, making it the ultimate trail-blazing fork for the downhill dynamo. Features: Steerer Material: Aluminium Crown Material: Forged Aluminium Stanchion Material: Aluminium, 35mm Lower Material: Magnesium casting Suspension: Air, OTT adjustment (negative spring preload) Damping:  Closed cartridge bladder system Steerer Diameter:  1 1/8-1.5", tapered Adjustments: High-speed and low-speed compression, rebound, OTT, air pressure Axle to Crown: 565mm Travel: 180mm Axle: 15x110mm Boost thru axle (bolted) Offset: 44mm Buy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.

Anbieter: Chain Reaction Cy...
Stand: 22.01.2020
Zum Angebot
DVO Suspension Diamond D1 Boost Fork 27.5" 44mm...
763,19 € *
ggf. zzgl. Versand

DVO Suspension Diamond D1 Boost Fork 27.5" 44mm OffsetMade with quality, hard-wearing materials and top-level suspension technology, this enduro-centric fork by DVO is boldly built for exhilarating downhill adventures. Constructed from aluminium, with magnesium-cast lowers, it provides every ride with 180mm of terrain-taming travel, as well as an array of adjustments to keep you upright and unrivalled from top to bottom. Boost-Sized, Aluminium-Built MTB ForkUsing a combination of six low-speed compression adjustments and 24 high-speed clicks, fine-tuning every ride to your preferred smoothness is made easy, as an OTT (Off The Top) adjustment system on the negative air spring improves control and sensitivity over smaller bumps. Equipped with a closed cartridge bladder damper and a Boost-sized thru axle, the Diamond D1 gives you enhanced rigidity and responsiveness over the most challenging runs, making it the ultimate trail-blazing fork for the downhill dynamo. Features: Steerer Material: Aluminium Crown Material: Forged Aluminium Stanchion Material: Aluminium, 35mm Lower Material: Magnesium casting Suspension: Air, OTT adjustment (negative spring preload) Damping:  Closed cartridge bladder system Steerer Diameter:  1 1/8-1.5", tapered Adjustments: High-speed and low-speed compression, rebound, OTT, air pressure Axle to Crown: 565mm Travel: 180mm Axle: 15x110mm Boost thru axle (bolted) Offset: 44mm Buy DVO Suspension Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.

Anbieter: Chain Reaction Cy...
Stand: 22.01.2020
Zum Angebot
Fox Suspension 32 Float CTD Performance Fork 20...
732,99 € *
ggf. zzgl. Versand

Fox Suspension 32 Float CTD Performance ForkThis top-quality fork is specifically designed for MTB use as it offers amazing comfort and control on every off-road pursuit. Giving you versatility, this stunning component's CTD damper delivers three clicks of trail mode adjustability. This means you can set the lever to trail mode for enjoying the benefits of soft, medium and firm settings. As a result, you can dial in exactly how you want it to perform with the perfect level of low-speed compression damping.Features: Use: MTB Spring: Air Damping: CTD Wheel Size: 27.5mm Travel: 120mm Steerer Diameter: 1 1/8" Adjustments: Trail adjust tuning (3 positions), Rebound, Air spring pressure Axle: 15QR thru-axle system Mount: Post mount disc brake mountingTechnologies: CTD: Climb. Trail. Descend. CTD is Fox's integrated ride dynamics system that makes it easy to set up your fork and shock to work together for unprecedented performance in all types of terrain. It's intuitive to use and can be instantly activated while riding. Just select one of three modes — Climb, Trail, or Descend — via a single remote lever or individual component levers. Complementing the CTD system is the D.O.S.S. height-adjustable seatpost. It features the same three modes — Climb, Trail, and Descend — for the ultimate ride control system. 15QR: Don't sacrifice performance by going with a pinner skewer. Fox teamed up with Shimano to create an axle that is extremely light and stiff, in a tool-free design. You'll gain a ton of confidence when you're deep in the rocks, roots, and ruts.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Anbieter: Chain Reaction Cy...
Stand: 22.01.2020
Zum Angebot
MRP Ribbon Air Gabel (Boost, 29 Zoll) - Schwarz...
871,79 € *
ggf. zzgl. Versand

MRP Ribbon Air 29" Forks - BoostSetting the standard for modern and future fork production, the excellent MRP Ribbon Air has been researched and developed to create an industry-leading front suspension system. Taking inspiration from the much-lauded Stage model, these forks up the ante by improving adjustability and performance while reducing weight, due in part to its outcast arch design. Boost-sized to give greater tyre clearance and allow for bigger landings, it is easy to see why this superb fork is held in such high regard.Standard-Setting, Boost-Sized Front Fork Kitted out with a bladder-free damper and independently adjustable positive and negative air chambers, tuning your compression and rebound is as efficient and easy as possible. Also, there are PSST pressure-relief valves to get rid of excess pressure caused by changes to elevation and temperature in the lower legs. An excellent addition to any 29er, the Ribbon forks are ready to take on any challenge.Features Stanchion Size: 35mm Spring System: FulFill independent positive and negative chamber system External Adjustments: Positive air-spring pressure, negative air-spring pressure, 8-position low-speed compression, 16-position Ramp Control, and rebound Internal Adjustments: Travel (in 5mm increments) Steerer: 1.5"-1.125", tapered only Brake Mount: 180mm PM (Disc only) Axle: Boost spacing - 15x110mm Weight: 1.91kg Buy MRP Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.

Anbieter: Chain Reaction Cy...
Stand: 22.01.2020
Zum Angebot
MRP Ribbon Air Gabel (Boost, 29 Zoll) - Schwarz...
871,79 € *
ggf. zzgl. Versand

MRP Ribbon Air 29" Forks - BoostSetting the standard for modern and future fork production, the excellent MRP Ribbon Air has been researched and developed to create an industry-leading front suspension system. Taking inspiration from the much-lauded Stage model, these forks up the ante by improving adjustability and performance while reducing weight, due in part to its outcast arch design. Boost-sized to give greater tyre clearance and allow for bigger landings, it is easy to see why this superb fork is held in such high regard.Standard-Setting, Boost-Sized Front Fork Kitted out with a bladder-free damper and independently adjustable positive and negative air chambers, tuning your compression and rebound is as efficient and easy as possible. Also, there are PSST pressure-relief valves to get rid of excess pressure caused by changes to elevation and temperature in the lower legs. An excellent addition to any 29er, the Ribbon forks are ready to take on any challenge.Features Stanchion Size: 35mm Spring System: FulFill independent positive and negative chamber system External Adjustments: Positive air-spring pressure, negative air-spring pressure, 8-position low-speed compression, 16-position Ramp Control, and rebound Internal Adjustments: Travel (in 5mm increments) Steerer: 1.5"-1.125", tapered only Brake Mount: 180mm PM (Disc only) Axle: Boost spacing - 15x110mm Weight: 1.91kg Buy MRP Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.

Anbieter: Chain Reaction Cy...
Stand: 22.01.2020
Zum Angebot
Fox Suspension Float DPS Factory 3Pos-Adj LV Re...
599,00 € *
ggf. zzgl. Versand

Fox Float DPS Factory 3Pos-Adj LV Rear ShockThis inline rear shock is developed for fast-paced MTB use as it offers consistent shock absorption on your mountain bike adventures. It features a hard-wearing aluminium construction, which makes it perfect at handling all the challenges that comes with shredding the mountain bike trails. Exclusive to the Factory Series, this model is also equipped with a genuine Kashima coat. This coating on the shaft ensures smooth operation as well as a stunning appearance.Dual Piston MTB Rear ShockEngineered for performance, this rear shock is kitted out with a dual piston valve design. This means you'll benefit from its dedicated compression and rebound pistons, which provide a firm lockout without compromising bump compliance, ride control or efficiency. The Fox Float DPS Factory 3Pos-Adj LV Rear Shock is also equipped with a DPS damper with three positions of adjustment. This makes it perfect for riders who want a rear shock which matches their riding style.Please note: This item includes the damper only. Mounting hardware is available separately.Features:Material: AluminiumFinish: Genuine Kashima Coat Use: MTBAir Sleeve: Float EVOLDamper: DPSAdjustment: 3-position lever actuated Open, Medium and Firm modes, Open model adjust tuning range (1, 2 and 3), rebound and air pressureSize Options: 190x50mm, 200x50mm, 200x57mm and 215x64mmCompatibility: Full suspension MTB framesLockout: YesRemote Optional or Required: NoPump included: NoMounting Kit Included: NoBuy Fox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Anbieter: Chain Reaction Cy...
Stand: 22.01.2020
Zum Angebot
Fox Suspension Float DPS Factory 3Pos-Adj LV Re...
599,00 € *
ggf. zzgl. Versand

Fox Float DPS Factory 3Pos-Adj LV Rear ShockThis inline rear shock is developed for fast-paced MTB use as it offers consistent shock absorption on your mountain bike adventures. It features a hard-wearing aluminium construction, which makes it perfect at handling all the challenges that comes with shredding the mountain bike trails. Exclusive to the Factory Series, this model is also equipped with a genuine Kashima coat. This coating on the shaft ensures smooth operation as well as a stunning appearance.Dual Piston MTB Rear ShockEngineered for performance, this rear shock is kitted out with a dual piston valve design. This means you'll benefit from its dedicated compression and rebound pistons, which provide a firm lockout without compromising bump compliance, ride control or efficiency. The Fox Float DPS Factory 3Pos-Adj LV Rear Shock is also equipped with a DPS damper with three positions of adjustment. This makes it perfect for riders who want a rear shock which matches their riding style.Please note: This item includes the damper only. Mounting hardware is available separately.Features:Material: AluminiumFinish: Genuine Kashima Coat Use: MTBAir Sleeve: Float EVOLDamper: DPSAdjustment: 3-position lever actuated Open, Medium and Firm modes, Open model adjust tuning range (1, 2 and 3), rebound and air pressureSize Options: 190x50mm, 200x50mm, 200x57mm and 215x64mmCompatibility: Full suspension MTB framesLockout: YesRemote Optional or Required: NoPump included: NoMounting Kit Included: NoBuy Fox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Anbieter: Chain Reaction Cy...
Stand: 22.01.2020
Zum Angebot
Fox Suspension Float DPS Factory 3Pos-Adj LV Re...
599,00 € *
ggf. zzgl. Versand

Fox Float DPS Factory 3Pos-Adj LV Rear ShockThis inline rear shock is developed for fast-paced MTB use as it offers consistent shock absorption on your mountain bike adventures. It features a hard-wearing aluminium construction, which makes it perfect at handling all the challenges that comes with shredding the mountain bike trails. Exclusive to the Factory Series, this model is also equipped with a genuine Kashima coat. This coating on the shaft ensures smooth operation as well as a stunning appearance.Dual Piston MTB Rear ShockEngineered for performance, this rear shock is kitted out with a dual piston valve design. This means you'll benefit from its dedicated compression and rebound pistons, which provide a firm lockout without compromising bump compliance, ride control or efficiency. The Fox Float DPS Factory 3Pos-Adj LV Rear Shock is also equipped with a DPS damper with three positions of adjustment. This makes it perfect for riders who want a rear shock which matches their riding style.Please note: This item includes the damper only. Mounting hardware is available separately.Features:Material: AluminiumFinish: Genuine Kashima Coat Use: MTBAir Sleeve: Float EVOLDamper: DPSAdjustment: 3-position lever actuated Open, Medium and Firm modes, Open model adjust tuning range (1, 2 and 3), rebound and air pressureSize Options: 190x50mm, 200x50mm, 200x57mm and 215x64mmCompatibility: Full suspension MTB framesLockout: YesRemote Optional or Required: NoPump included: NoMounting Kit Included: NoBuy Fox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

Anbieter: Chain Reaction Cy...
Stand: 22.01.2020
Zum Angebot